FDK developed an ultra-small and ultra-low profile “Power inductor”
- Realized an ultra-small and ultra-low profile (1.6mm x 0.8mm x 0.3mm) by LGA structure -


Jul. 15, 2014
FDK CORPORATION

Power inductor "MIPSKZ1608G"

FDK CORPORATION (Tokyo Stock Exchange 2nd Section: Code 6955) developed the ultra-small and ultra-low profile Power inductor “MIPSKZ1608G” (1.6mm x 0.8mm x 0.3mm maximum height) which was realized to reduce 40% of its height in comparison with the conventional models of MIPSUZ2012D series.

This “MIPSKZ1608G” is the most suitable power inductor for the power supply circuit of the mobile devices such as wearable devise, smart phone, tablet, and digital camera.

In recent years, the number of parts used for mobile devices continued to increase with the high and multiple functionality. Thus, mounting space per part is reduced and the needs of passive components are required to be downsized and the profiles to be lowered. In addition, the mobile devices tend to use converter circuits which use battery energy effectively. FDK has been responding to the market trend and has been striving to downsize power inductors.

The “MIPSKZ1608G” is designed to adopt bottom electrode structure, different from the conventional MIPSUZ2012D series. By adopting the original “ferrite material technology”, ”fine print technology”, and “Land Grid Array Package” structure, we were able to realize the smaller and lower profile models which are 40% lower in height than the conventional model of MIPSUZ2012D series.

It enables to use high-density mounting on the modules, which have strict height limit on implementation, and thus it will contribute to the thinning of modules. In addition, since the product has a flat top surface, it is possible for the IC to be on-chip. By using the most suitable magnetic circuit design technology, the low-resistant inductors were realized.

FDK will continuously extend the line-ups of the low-profile power inductors to respond to the customers’ needs.
The “MIPSKZ1608G” will be exhibited at the FDK booth of TECHNO-FRONTIER 2014 in Tokyo Big Sight from July 23 to 25.

<Application>
- Power Circuit for the mobile devices such as wearable device, smart phone, tablet terminal, and digital camera.
- Power modules, etc.

<Feature>
- Ultra-small and ultra-low profile power inductor with the size of (1.6mm x 0.8mm x 0.3mm maximum height)
- Realized low resistance with small and low profile size
- Adopting the bottom electrode structure, it realized the high-density mounting, built-in to the thin module and the system-on-chip ICs


[Specification]
MIPSKZ1608G series
Product name MIPSKZ1608G
R33
MIPSKZ1608G
R47
MIPSKZ1608G
R56
MIPSKZ1608G
1R0
MIPSKZ1608G
1R5
Inductance(μH) at 1MHz 0.33 0.47 0.56 1.0 1.5
DC resistance(ohm) 0.16 0.20 0.20 0.25 0.45
Rated current(A)*1 0.7 0.6 0.6 0.5 0.4
*1: In case temperature rises to 40℃ due to self-heating
Operating temperature range: -40 to 85℃


[Contact] FDK CORPORATION
Corporate Communication Office
TEL: +81-3-5473-4654

[Close]