| May 16, 2007 |
| FDK Corporation |
 |
| Introduced 10A and 25A Senpai POL Converters in Smallest Industry-Standard Footprints |
|
|
FDK Corporation (Tokyo Stock Exchange 1st Section: Code 6955) announced the addition
of two new high performance dc/dc converters to its Senpai Series of non-isolated
point-of-load (POL) converters. The FPMR12TR7510 converter operates from a 6.0 Volt
- 14.0 Volt (V) DC input bus, and delivers up to 10 Amperes (A) in the smallest
industry-standard footprint, providing up to 67% higher output current than other
available POL converters in the same input voltage range. The power density of up to
780 Watts/cubic inch sets a new standard for power delivery in this footprint and pin-out.
The FPLR05SR7525 converter operates from a 3.0V – 5.5V DC input bus, and delivers up to 25A
in the next smallest industry-standard footprint, providing up to 25% higher output current
than other available POL converters in the same size and input voltage range.
The FPMR12TR7510 converter is offered in a 0.9x0.4x0.195 inch (22.9x10.2x4.95mm)
industry-standard SIP package and provides a tightly-regulated programmable output
voltage in the range of 0.75V – 5.5V DC. The FPLR05SR7525 converter comes in a
1.30x0.53x0.327 inch (33.0x13.4x8.3mm) SMD package with industry-standard footprint
and pin-out and provides a tightly-regulated programmable output voltage in the range
of 0.75V – 3.63V DC. Both models feature remote ON/OFF, over-current and over-temperature
protection, and output voltage adjust, and are compatible with standard trim equations.
These Senpai Series dc/dc converters are designed for Intermediate Bus Architecture (IBA)
and Distributed Power Architecture (DPA) applications that require high efficiency, tight
regulation, and high reliability in elevated temperature environments. The FPMR12TR7510
and FPLR05SR7525 converters deliver full-rated output current with no derating in ambient
temperatures of up to 60 and 70 degrees Celsius, respectively, with 400LFM (2m/s) airflow.
This leading-edge thermal performance results from electrical, thermal, and packaging
design that is optimized for high density circuit card conditions.
“FDK continues to push the edge of the envelope for point-of-load power delivery,”
said Dr. Apurba Roy, executive advisor, FDK Corporation. “These latest additions to
the Senpai Series reflect FDK’s ongoing commitment to providing high performance, high
quality, and cost effective IBA power products.”
All Senpai Series products are RoHS compliant. They are manufactured using FDK’s
state-of-the-art in-house manufacturing processes and systems. In quantities of
1,000 pieces, the FPMR12TR7510 and FPLR05SR7525 converters are priced at $9.50 and
$18.00, respectively. Samples are available now.
For more information visit our website at
http://www.fdk.com/cyber-e/s_ddconv/s_dd_conv.htm
|
|
| America: |
Europe: |
| Contact: Takeo Aridomi |
Contact: Jin Hasegawa |
| FDK AMERICA, INC. |
FDK ELECTRONICS GMBH |
| 2270 North First Street |
Heerdter Lohweg 89 |
| San Jose, California |
40549 Dusseldorf, Germany |
| 95131-2022, U.S.A. |
Phone: +49-211-537-464-0 |
| Phone: 408-432-8331 |
FAX: +49-211-593-549 |
| FAX: 408-435-7478 |
Email: jinh@fdk.com |
| Email: taridomi@fdk.com |
|
|
| Japan: |
|
| Contact: Jun Akutagawa |
|
| FDK CORPORATION |
|
| Hamagomu Bldg, 5-36-11 Shimbashi |
|
| Minato-ku, Tokyo 105-8677, Japan |
|
| Phone: +81-3-5473-4674 |
|
| FAX: +81-3-3431-9436 |
|
| Email: jun@fdk.co.jp |
|
|
|
