Non Isolated DC-DC Converter

The Digital Tomodachi Series of non-isolated dc-dc converters deliver exceptional electrical and thermal performance in DOSA based footprints for Point-of-Load converters. Operating from a 3.0Vdc-14.4Vdc input, these are the converters of choice for Intermediate Bus Architecture (IBA) and Distributed Power Architecture applications that require high efficiency, tight regulation, and highreliability in elevated temperature environments with low airflow. The PMBus interface supports a range of commands to both control and monitor the module. The module also includes the Tunable LoopTM feature that allows the user to optimize the dynamic response of the converter to match the load with reduced amount of output capacitance leading to savings on cost and PWB area.

The FGMD12SR6020*A converter of the Tomodachi Series delivers 20A of output current at a tightly regulated programmable and PMBus control output voltage of 0.45Vdc to 5.5Vdc. The thermal performance of the FGMD12SR6020*A is best-in-class: Little derating is needed up to 85℃, under natural convection.

Get Data-Sheet Click Here ! (PDF)
Intermediate Bus Architecture
Data/Voice processing
Distributed Power Architecture
Computing (Servers, Workstations)
Test Equipments
Compliant to RoHS EU Directive 2002/95/EC
Delivers up to 20A (110W)
High efficiency, no heatsink required
Negative and Positive ON/OFF logic
DOSA based
Small size : 0.8 in x 0.45 in x 0.335 in
Tape & reel packaging
Programmable output voltage from 0.6V to 5.5V via external resisteor. Digitally adjustable down to 0.45Vdc
Digital interface through the PMBusTM # protocol
Tunable LoopTM to optimize dynamic output voltage response
Flexible output voltage sequencing EZ-SEQUENCE
Power Good signal
Fixed switching frequency with capability of external synchronization
Auto-reset output over-current protection
Remote ON/OFF
Ability to sink and source current
No minimum load required
Start up into pre-biased output
UL*60950-1 2nd Ed. Recognized, CSA C22.2 No.60950-1-07 Certified, and VDE (EN60950-1 2nd Ed.) (Pending)
ISO** 9001 and ISO 14001 certified manufacturing facilities
* UL is a registered trademark of Underwriters Laboratories, Inc.
† CSA is a registered trademark of Canadian Standards Association.
‡ VDE is a trademark of Verband Deutscher Elektrotechniker e.V.
** ISO is a registered trademark of the International Organization of Standards
# The PMBus name and logo are registered trademarks of the System Management Interface Forum (SMIF)

Get Data-Sheet Click Here ! (PDF)