series

---

POL DC-DC Converter
<FPMR24S3R304PA>

TheSenpai Series of non-isolated dc-dc converters deliver exceptional electrical and thermal performance in industry-standard footprints for Point-of-Load converters. Operating from a 20.4Vdc-27.6Vdc input, these are the converters of choice for Industrial and networking applications that require high efficiency, tight regulation, and high reliability in elevated temperature environments with low airflow. The FPMR24S3R304PA converter of the Senpai Series delivers 4A of output current at a tightly regulated programmable output voltage of 3.0Vdc to 15.5Vdc. The thermal performance of the FPMR24S3R304PA is best-in-class: No derating is needed up to 85℃, under natural convection. This leading edge thermal performance results from electrical, thermal and packaging design that is optimized for high density circuit card conditions. Extremely high quality and reliability are achieved through advanced circuit and thermal design techniques and FDK’s state of the art in-house manufacturing processes and systems. Get Data-Sheet Click Here ! (PDF)

Applications Industrial Networking

Features Delivers up to 4A(62W) High efficiency, no heatsink required No derating up to 85℃ Positive ON/OFF logic Industry-standard SMD footprint RoHS compliance Small size and low profile: 0.80” x 0.45” x 0.211” nominal Coplanarity less than 0.004” Tape & reel packaging Programmable output voltage via external resistor No minimum load required Start up into pre-biased output Remote ON/OFF Power good signal Auto-reset output over-current protection Auto-reset over-temperature protection High reliability, MTBF = 1 Million Hours UL60950 recognition in U.S. & Canada, and CB Scheme certification per IEC/EN60950 (Pending) All materials meet UL94, V-0 flammability rating

---