<HOME> [TOP]

series POL DC-DC Converter <FPMR12SR7510*A> Get Big Picture ! The Senpai Series of non-isolated dc-dc converters deliver exceptional electrical and thermal performance in industry-standard footprints for Point-of-Load converters. Operating from a 6.0Vdc-14.0Vdc input, these are the converters of choice for Intermediate Bus Architecture (IBA) and Distributed Power Architecture applications that require high efficiency, tight regulation, and high reliability in elevated temperature environments with low airflow. The FPMR12SR7510*A converter of the Senpai Series delivers 10A of output current at a tightly regulated programmable output voltage of 0.7525Vdc to 5.5Vdc. The thermal performance of the FPMR12SR7510*A is best-in-class: Little derating is needed up to 85, under natural convection. This leading edge thermal performance results from electrical, thermal and packaging design that is optimized for high density circuit card conditions. Extremely high quality and reliability are achieved through advanced circuit and thermal design techniques and FDK's state of the art in-house manufacturing processes and systems. Get Data-Sheet Click Here ! (PDF) Applications Intermediate Bus Architecture Telecommunications Data/Voice processing Distributed Power Architecture Computing (Servers, Workstations) Features RoHS compliance Delivers up to 10A (55W) High efficiency, no heatsink required Negative and Positive ON/OFF logic Industry-standard SMD footprint Small size and low profile: 0.80" x 0.45" x 0.211" nominal Coplanarity less than 0.004" Tape and reel packaging Programmable output voltage via external resistor No minimum load required Start up into pre-biased output Remote ON/OFF Auto-reset output over-current protection Auto-reset over-temperature protection High reliability, MTBF = TBD Million Hours UL60950 recognition in U.S. & Canada, and CB Scheme certification per IEC/EN60950(Pending) All materials meet UL94, V-0 flammability rating Get Data-Sheet Click Here ! (PDF)