|
|
 series
POL DC-DC Converter
<FPMR05TR7510*A>
Get Big Picture ! |
The Senpai Series of non-isolated dc-dc converters deliver exceptional electrical
and thermal performance in industry-standard footprints for Point-of-Load
converters. Operating from a 2.4Vdc-5.5Vdc input, these are the converters
of choice for Intermediate Bus Architecture (IBA) and Distributed Power
Architecture applications that require high efficiency, tight regulation,
and high reliability in elevated temperature environments with low airflow.
The FPMR05TR7510*A converter of the Senpai Series delivers 10A of output current at a tightly regulated programmable output voltage of 0.7525Vdc to 3.63Vdc. The thermal performance of the FPMR05TR7510*A is best-in-class: Little derating is needed up to 85 , under natural convection.
This leading edge thermal performance results from electrical, thermal
and packaging design that is optimized for high density circuit card conditions.
Extremely high quality and reliability are achieved through advanced circuit
and thermal design techniques and FDK’s state of the art in-house manufacturing
processes and systems.
 Get Data-Sheet Click Here ! (PDF) |
Applications
 Intermediate Bus Architecture
Telecommunications
Data / Voice processing
Distributed Power Architecture
Computing (Servers, Workstations) |
Features
RoHS compliant
Delivers up to 10A (36.3W)
High efficiency, no heatsink required
No serating up to 85
Negative and Positive ON/OFF logic
Industry-standard SIP pinout
Small size and low profile: 0.90” x 0.40” x 0.195” nominal
Programmable output voltage via external resistor
No minimum load required
Start up into pre-biased output
Remote ON/OFF
Auto-reset output over-current protection
Auto-reset over-temperature protection
High reliability, MTBF = 1 Million Hours
UL60950 recognition in U.S. & Canada, and CB Scheme certification per
IEC/EN 60950(Pending)
All materials meet UL94, V-0 flammability rating |
Get Data-Sheet Click Here ! (PDF)
|
