|
|
 series
POL DC-DC Converter
<FPMR05TR7506*A>
|
The Senpai Series of non-isolated dc-dc converters deliver exceptional electrical and thermal performance in industry-standard footprints for Point-of-Load converters. Operating from a 2.4Vdc-5.5Vdc input, these are the converters of choice for Intermediate Bus Architecture (IBA) and Distributed Power Architecture applications that require high efficiency, tight regulation, and high reliability in elevated temperature environments with low airflow.
The FPMR05TR7506*A converter of the Senpai Series delivers 6A of output current at a tightly regulated programmable
output voltage of 0.7525Vdc to 3.63Vdc. The thermal performance of the
FPMR05TR7506*A is best-in-class: No derating is needed up to 85℃, under natural convection.
This leading edge thermal performance results from electrical, thermal
and packaging design that is optimized for high density circuit card conditions.
Extremely high quality and reliability are achieved through advanced circuit
and thermal design techniques and FDK’s state of the art in-house manufacturing
processes and systems.
 Get Data-Sheet Click Here ! (PDF) |
Applications
 Intermediate Bus Architecture
Telecommunications
Data/Voice processing
Distributed Power Architecture
Computing (Servers, Workstations) |
Features
RoHS compliant
Delivers up to 6A (21.78W)
High efficiency, no heatsink required
No derating up to 85
Negative and Positive ON/OFF logic
Industry-standard SIP pin-out
Small size and low profile: 0.90” x 0.40” x 0.195” nominal
Programmable output voltage via external resistor
No minimum load required
Start up into pre-biased output
Remote ON/OFF
Auto-reset output over-current protection
Auto-reset over-temperature protection
High reliability, MTBF = 1 Million Hours
UL60950 recognition in U.S. & Canada, and CB Scheme certification per
IEC/EN 60950(Pending)
All materials meet UL94, V-0 flammability rating |
Get Data-Sheet Click Here ! (PDF)
|
