Microwave ferrites Capitalizing on its vast accumulation of ferrite material know-how, FDK supplies many variations of low-loss, high-performance micro-wave ferrites. The frequency selection ranges from VHF and UHF to millimeter waves for both spinel and garnet type ferrites. Features Low loss ensured by narrow magnetic line-widths(H)and low dielectric loss levels(tan de). Operation at any frequency made possible by a wide selection of saturation magnetization levels. Variegated shape selection offered to facilitate users'precision processing work. Proven mechanical strength. Applications Microwave communications equipment Receivers for satellite broadcast and satellite communications Microwave components (circulators, isolators, phase shifters, switches, etc.) Spinel and garnet type ferrite materials Specifications Material Saturation magnetization 4pMs(G) [(T)] Line width H (Oe)max. [(kA/m)] Dielectric constant e Dielectric loss tan de max. Curie temp. Tc(ºC) min. Saturation flux density Bs(G) [(T)] Residual flux density Br(G) [(T)] Coercive force Hc(Oe) [(A/m)] Squareness ratio Br/B²° Density d (g/cm³) Document No. MW-M-OOO PDF M31 5000±5% [0.500] 150 [11.937] 13±5% 5X10-4 300 4300 [0.430] 3200 [0.320] 0.8 [63.662] 0.74 5.3±0.1 002 M21 2850±5% [0.285] 350 [27.853] 12±5% 6X10-4 230 2300 [0.230] 2000 [0.200] 1.4 [111.409] 0.87 4.5±0.1 003 M23 2000±5% [0.200] 250 [19.895] 11.5±5% 6X10-4 180 1650 [0.165] 1400 [0.140] 1.1 [87.535] 0.85 4.5±0.1 004 Y10 1780±5% [0.178] 55 [4.377] 13.5±5% 5X10-4 270 1600 [0.160] 1230 [0.123] 1.0 [79.578] 0.77 5.05±0.1 005 Y13 1200±5% [0.120] 55 [4.377] 13±5% 5X10-4 220 1080 [0.108] 920 [0.092] 1.2 [95.493] 0.85 5.0±0.1 006 Y15 800±5% [0.080] 55 [4.377] 13±5% 5X10-4 200 730 [0.073] 600 [0.060] 1.2 [95.492] 0.82 5.0±0.1 008 Y16 650±5% [0.065] 55 [4.37] 13±5% 5X10-4 170 500 [0.050] 390 [0.039] 1.3 [103.451] 0.78 5.0±0.1 009 Y17 450±5% [0.045] 55 [4.377] 13±5% 5X10-4 140 390 [0.039] 260 [0.026] 1.2 [95.493] 0.67 5.0±0.1 010 NOTE: H,e, and tan de values were measured at a frequency level of 10 GHz. Bz, Br, Hc and Br/B20 are reference values. Shapes and dimensions Shape Disk Rod Plate Bar Triangular plate External appearance Dimensional range Diameter: 65mm max. Thickness: 4mm max. Diameter: 30mm max. Length: 50mm max. Long side: 50mm max. Thickness: 4mm max. Short side: 10mm max. Length: 50mm max. Side: 60mm max. Thickness: 5mm max. Naming of product number Close