|
T-1530S SMT 15mm-width type (for cold-cathode tube lighting)
 |
 |
Slim, low-profile design(3.2mm max*) and high power.
(* height on board is 3.2mm max. Pit type) |
|
PCB width is 15mm,because pit wide is 12mm. |
|
Supports reflow soldering. (Supports Pb free soldering) |
|
Supports automatic mounting. (Tray type) |
|
High efficiency possible by using separate excitation IC. |
| Applications A springboard for product differentiation |
|
Note PC |
|
LCD monitor (up to 17inches) |
|
LCD TV (up to 17inches) |
|
| Electrical characteristics |
| Part No |
Max.output
(W) |
Frequency
(KHz) |
Max. output voltage
(Vo-p) |
Output Open voltage |
Withstand voltage(AC60Hz)(Vrms) |
| Between 1st & 2nd windings |
Between 2nd winding & core |
| CD-T-1530S |
3(4)<*1> |
30-200 |
2000<*2> |
2800<*3> |
500 |
500 |
| *3 Gap(3Item)vs. AL |
| Gap [mm] |
AL [nH/N²] |
| NON |
- |
| 0.10 |
110 |
| 0.15 |
100 |
| 0.20 |
90 |
|
|
* Notes
To match your exact needs, please contact us for information on T-1530S
customization. The T-1530S cannot be used in a floating type circuit.Be
sure to ground the No.6 pin (start pin of the secondary winding).
*1 Max output power and efficiency vary according to operating conditions.
(Up to 4W according to operating conditions).
*2 It varies according to the number of winding turns.
*3 It is within 3sec or less and varies according to the number of winding turns.
 |
|
Note: Should not pattern on the transformer bottom
|
|
Unit: mm
|
| Recommended landing pattern and drop dimensions |
|
 Unit: mm |
|
