|
T-1034 SMT 10mm-width type
 |
| Features |
 |
Slim, low-profile design(4.7mm max.) and high power. |
|
Supports reflow soldering. (Supports Pb free soldering) |
|
Supports automatic mounting (Tray type) |
|
High efficiency possible by using separate excitation IC. |
| Applications A value-added option in downsizing |
|
Note PC |
|
LCD monitor (up to 21inches) |
|
LCD TV (up to 21inches) |
|
| Electrical characteristics |
| Part No. |
Max. outputpower
(w) |
Frequency
(KHz) |
Max. output voltage
(VO-p) |
OutputOpen voltage
(VO-P) |
Withstand voltage(AC60Hz)(Vrmss) |
| Between 1ST&2nd windings |
Between 2NDWinding& ore |
| CD-T-1034 |
4(6W)<*1> |
40-200 |
2000<*2> |
2800<*3> |
500 |
500 |
| Gap(3Item)vs. AL |
| Gap [mm] |
AL [nH/N²] |
| NON |
- |
| 0.075 |
100 |
| 0.10 |
90 |
| 0.15 |
75 |
|
|
|
Notes
To match your exact needs, please contact us for information on T-1034 customization. The T-1034 cannot be used in a floating type circuit.Be sure to ground the No.4 pin (start pin of the secondary winding).
*1 Max output power and efficiency vary according to operating conditions.
(Up to 6W according to operating conditions).
*2 It varies according to the number of winding turns.
*3 It is within 3sec or less and varies according to the number of winding
turns.
| Shapes and dimensions |
 |
|
Note: Should not pattern on the transformer bottom
|
|
Unit: mm
|
|
| Recommended landing pattern and drop dimensions
|
|
 |
|
Unit: mm
|
|
