|
T-1033A SMT 10mm-width type
(Seperate excitation IC drive feasibility)
 |
| Features |
| * |
Slim, low-profile design (4.7mm max.) and high power. |
| * |
Supports reflow soldering. (Supports Pb free soldering) |
| * |
Supports automatic mounting (Tray type) |
| * |
High efficiency possible by using separate excitation IC. |
| Applications A value-added option in downsizingtt |
| * |
Note PC |
| * |
LCD monitor (up to 17inches) |
| * |
LCD TV (up to 17inches) |
|
| Electrical characteristics |
| Part No |
Max.output
(W) |
Frequency
(KHz) |
Max.output voltage
(Vo-p) |
Output open voltage
(Vo-p) |
Withstand voltage(AC60Hz) (Vrms) |
| Between 1st & 2nd windings |
Between 2nd winding & core |
| CD-T-1033A |
3.5(5)<*1> |
40-200 |
2000<*2> |
2800<*3> |
500 |
500 |
| Connection diagram(typical example) |
| *3 Gap(3tem)vs. AL |
| Gap [mm] |
AL [Nh/N²] |
| NON |
- |
| 0.075 |
100 |
| 0.10 |
90 |
| 0.15 |
75 |
|
|
|
Notes
The T-1033A is not usable in a floating type circuit.
Be sure to ground the No.6 pin of the secondary winding.
Customized specifications are available according to input-output characteristics.*1: The maximum output (up to 5W)
And efficiency depend on operating conditions. *2: The maximum output voltage varies according to winding specifications.
*3: The output open voltage within 3 seconds varies according to winding specifications.
| Shapes and dimensions |
 |
|
Note: Must not pattern on the transformer bottom
|
|
Unit: mm
|
|
| Recommended landing pattern and drop dimensions
|
|
 |
|
Unit: mm
|
|
