|
T-0940 SMT 9mm-width type
(Seperate excitation IC drive feasibility)
 |
| Features |
*
|
Slim, low-profile design(4.0mm max.) and high power. |
| * |
Supports reflow soldering. (Supports Pb free soldering) |
| * |
Supports automatic mounting. (Tray type) |
| * |
High efficiency possible by using separate excitation IC. |
|
|
| Applications |
| * |
Note PC (up to 17inches) |
| * |
Portable DVD player |
|
|
| Electrical characteristics |
| Part No. |
Max. output power
(w) |
Frequency
(KHz) |
Max. output voltage
(VO-p) |
OutputOpen voltage
(VO-P) |
Withstand voltage(AC60Hz)(Vrmss) |
| Between 1ST&2nd windings |
Between 2NDWinding& ore |
| CD-T-0940 |
4(6)<*1> |
50-200 |
2000<*2> |
2800<*3> |
500 |
500 |
Connection diagram (typical example)
| Gap(3Item)vs. AL |
| Gap [mm] |
AL [nH/N²] |
| NON |
- |
| 0.075 |
90 |
| 0.10 |
80 |
| 0.15 |
70 |
|
|
|
Notes
To match your exact needs, please contact us for information on T-0940 customization. The T-0940 cannot be used in a floating type circuit.Be sure to ground the No.4 pin(start pin of the secondary winding).
*1 Max output power and efficiency vary according to operating conditions.
(Up to 6W according to operating conditions).
*2 It varies according to the number of winding turns.
*3 It is within 3sec or less and varies according to the number of winding turns.
| Shapes and dimensions |
 |
|
|
|
Unit: mm
|
|
| Recommended landing pattern and drop dimensions
|
|
 |
|
Unit: mm
|
|
